Rockville RPG10BT Owner's Manual download pdf (Page 12)

UNIT FAILS TO POWER UP.

1. Make sure unit is plugged in properly to wall outlet.

2. Check that power cable is plugged in tightly to unit.

3. If people or equipment tend to step and roll over or stretch your power cable it can

get damaged. Always try a second cable to test for shorts in original cable. Dispose of

original damaged power cables immediately.

4. If system still fails to light, UNPLUG FROM WALL. There is a small door below the

plug input on the Power Gig unit, pop o this door and remove the fuse with a needle

nose pliers and replace with same rated fuse. Please make sure unit is unplugged from

wall before attempting to change the fuse!

UNIT TURNS ON, BUT NO SOUND.

1. Check that Volume is turned up.

2. Be sure your microphone is turned on.

3. All appropriate cables should be plugged in correctly.

5. Be sure Level of appropriate channels are set above 0 and matched correctly

as indicated above.

Fuse replacement Diagram

Troublesßhooting

OLD FUSE

SPARE FUSE

1 2 ... 7 8 9 10 11 12 13 14

No comments

Rockville RPG10BT Owner's Manual Page 12