Rockville RPG10BT Owner's Manual download pdf (Page 6)

3. Keep Volume at 0 position.

4. Turn Mic Level to 0 position.

5. Switch on the Power Gig unit.

6. Slowly turn Mic Level clockwise until you achieve appropriate volume setting. This

is determined by the CLIP LED indicator light. Proper function is achieved when the

CLIP indicator lights up at peak levels, it should never be in constant on position.

7. The above adjustment matched the microphone preamp to the input volume of the

Power Gig unit.

8. Now turn up the Volume to necessary loudness by rotating clockwise.

Always stand behind the Power Gig when making your microphone adjustments to avoid

feedback distortion.

You can choose to hook up two microphones to your Power Gig in the following manner.

Set up microphone #1 as instructed above. Using same set up instructions, insert mi-

crophone #2 into second ultra-low noise Mic/Line input which features its own separate

Level control. Use this Level control to increase the microphone level and balance the

inputs between the two microphones before attempting to adjust the Volume.

Multi-Microphone Hook Up

PWR

6 6

CLIP

OFF

POWER

MIC2 LEVEL VOLUME

VOLUME

MIC 1

10 10

0 0

1 1

2 2

3 3

4 4

6 6

5 5

7 7

8 8

MIC1 LEVEL

MIC 2

1 2 3 4 5 6 7 8 9 10 11 12 13 14

No comments

Rockville RPG10BT Owner's Manual Page 6